Products Overview

Western Falcon Products

Western Falcon liners have successfully proven the use of thermoplastic liners in down-hole applications since 1992. Operators are experiencing drastic reductions in operating costs associated with rod-on-tubing wear and tubing corrosion failures. The liner material incorporates proprietary lubricants to aid in mitigating wear and corrosion failures in beam-pumped and progressive cavity pumped wells. Benefits can be realized in highly deviated and dog-legged wells without additional costs for slim hole rod boxes or rod guides. The liners have been equally successful in controlling tubular corrosion in other artificially lifted wells and disposal wells. The extremely smooth liner surface is helping many operators experience decreased pressure drops, electrical cost savings, and increased production due to fundamental hydraulic benefits. The liners have also proven resistant to wire line, acid, and chemical damage. Additionally, a unique mechanical bond allows reuse of used and lower quality tubing saving on steel costs. The bonding procedure allows lining pipe with surface imperfections including the ability to line over damaged used internal plastic coatings without the additional cost of removal. The connection system is the most reliable and easiest to install in the OCTG corrosion control industry.


Polycore High Density Polyethylene Liner

Polycore™ is a High Density Polyethylene (HDPE) liner. This patented product is highly abrasion resistant which accounts for its success in the mitigation of rod on tubing wear, wire line, mechanical, and handling damage. HDPE is chemically inert to corrosive materials enhancing its use as a corrosion barrier. The mechanically bonded seamless thermoplastic tube is tolerant to minor surface imperfections of pipe and eliminates concerns with holidays or voids as in adhesive or thermally bonded liners and coatings. Maximum Temperature 160° F (71° C) Oil, 180° F (82° C) Aqueous.

Standard Application Solution
Low-Temperature Rod Pumping Wells
Low-Temperature Water Wells
Liner-Compatible with New/Used Steel

Modified Polycore High Density Polyethylene Liner

Falcon Modified Polycore™ is a High Density Polyethylene (HDPE) liner. This patented product is highly abrasion resistant which accounts for its success in the mitigation of tubing rod wear, wire line, mechanical, and handling damage. HDPE is chemically inert to corrosive materials enhancing its use as a corrosion barrier. The mechanically bonded seamless thermoplastic tube is tolerant to minor surface imperfections and eliminates concerns with holidays or voids as in adhesive or thermally bonded liners and coatings.

Higher Collapse Strength
Liner Compatible with New/Used Steel

Enertube Polyolefin Liner

Enertube™ is a liner manufactured from a specially formulated blend of polyolefins. This liner is similar in mechanical properties to the field proven Falcon Polycore™ liner with a moderate increase in tensile strength and temperature resistance. This second generation of Falcon liners is specifically designed to operate in wells too hot for Polycore™ and is a seamless mechanically bonded liner providing a smooth tubing surface. Maximum Temperature 210° F (99° C) in all services.

Higher Temperature Water Wells
Solution Mining

Ultratube Engineering Thermoplastic Liner

Ultratube™ is a high performance liner manufactured from a proprietary blended polyphenylene sulfide thermoplastic resin specially formulated for use in downhole oil and gas production environments. This third generation liner has a significant increase in temperature stability, tensile strength, abrasion and chemical resistance over the other proven liners. The innovative polymers in this liner offer the broadest range of resistance to solvents, steam, strong bases, fuel, and acids. The new polymers are specifically designed to limit (not prevent) the permeability of acid gases such as CO2 and H2S. Maximum Temperature 350° F (175° C) in all services.

Higher Side Load Pumping Wells
Steam Flood
Gas Well Solution

Extremetube Engineering Thermoplastic Liner for Extreme Conditions

Extremetube™ is a high performance liner for the most extreme operating conditions. This unique liner is made from PEEK Polymer and is the highest tensile strength and highest temperature liner available. Extremetube™ is an excellent alternative to corrosion resistant alloy (CRA) tubulars and offers protection against corrosion and wear problems under the most severe environmental conditions. Maximum Temperature 500° F (260° C).

Offshore Tubing
Alternative to Corrosion Resistant Alloys
Which products best fit your needs?

 

Are you pulling tubing before the pump?

Are you not able to land the pump around the bend?

Looking to reduce operating costs in your water wells?

Does your well have a corrosion issue?

Would you like to see your well economics improve in any market environment?

The Western Falcon Difference

Western Falcon has run more than 70 MILLION FEET (21 Million Meters) of thermoplastic liners throughout the world. We have the knowledge and expertise to provide a tubular solution for ANY well environment. Find out more about WHO WE ARE by clicking below.

Western Falcon’s technologically advanced thermoplastic liners are more robust, flexible and are less expensive than the alternative thermoset coating. This type of liner technology is suitable for all types of well environments regardless of temperature, depth or well type. Visit our Frequently Asked Questions to learn more!

Our patented liner technology has been designed to solve wear and corrosion issues in both water and producing well bores. It is so flexible in its design, that no longer do you need to run different strings for one or the other. This is an ideal solution for a CONVERSION WELL. This versatility directly translates to less changeover and speaks to its longevity. Visit our Applications for more detail.

Industry leaders in major producing regions around the world are running our technologically advanced liners to reap cost savings, reduce workover downtimes and increase revenue. Don’t be left in the dust. Contact us to hear more about the solution we have for you!


Contact your Field Representative Today for a Customized Solution

Western Falcon has demonstrated success in over 70 million feet (20 million meters) of pipe in the last 20 years! There is not a well we can’t fix.