Seamless Polyolefin Liner
 
Falcon Enertube is a new liner manufactured from a specially formulated blend of polyolefins. This liner is similar in mechanical properties to the field proven Falcon Polycore™ liner with a moderate increase in tensile strength and temperature resistance. This second generation of Falcon liners is specifically designed to limit the permeability of acid gases such as CO2 and H2S. Enertube™ is a seamless mechanically bonded liner providing a smooth tubing ID surface.

 



Primary Applications

    ·    CO2 Injection (WAG) Wells

    ·        Beam Pumped Wells

    ·        PC Pumped Wells

    ·        Submersible Pumped Wells

    ·        Plunger Lift Wells

    ·        Gas Lift Wells

    ·        Coal Bed Methane

    ·        Acid Gas Injection

    ·    Water Injection

    ·        Disposal

    ·        Flow Lines

    ·        Solution Mining  

           
 

Benefits

 

  • Eliminate rod on tubing wear
  • Corrosion control
  • Reduce well servicing frequency and cost
  • Reduce tubing and rod replacements
  • Reduce corrosion inhibitor requirements
  • Reduce friction and peak polish rod load
  • Eliminate rod guides
  • Optimize your current inventory by utilizing lower quality tubing
  • Apply over used coatings
  • No stabbing guides or special coupling inserts required
  • No field service technician required
  • Lined tubing in stock

Specifications

  • Maximum operating temperature is 2100 F (990 C)
  • Coated couplings to protect J-area against corrosion
  • Minimum API torque recommended for tubing connection make-up
  • No special position make-up required

 
Tubing Size ID Drift Liner Weight
2 3/8” 1.71” 1.60” .40 #/ft  
2 7/8" 2.16” 2.00” .47 #/ft  
3 ˝”  2.67" 2.50”  .64 #/ft